Turning On The Power - Dukane CP-X2015WN/8755N User Manual

Turning on the power

1. Make sure that the power cord is firmly and correctly connected to the
projector and the outlet.
2. Make sure that the POWER indicator is
steady orange. Then remove the lens
cover.
3. Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and the
POWER indicator will begin blinking in
green. When the power is completely on, the
indicator will stop blinking and light in steady
green.
WARNING ►A strong light is emitted when the projector's power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector's openings.
NOTE • Please power on the projector prior to the connected devices.
• The projector has the DIRECT POWER ON function, which can make the
projector automatically turn on. For more information, please see User's
Manual - Operating Guide.
STANDBY/ON button
POWER indicator
9