Adding A Digital Satellite Receiver: Connecting To A Television And A Digital Satellite Receiver - Panasonic Diga DMR-EX769EB Operating Instructions Manual

Hide thumbs Also See for Diga DMR-EX769EB:
Table of Contents

Advertisement

Using a fully wired 21-pin Scart cable
– You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (
– You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
"AV1 Output" in the Setup menu is set to "RGB 1 (without component)" or "RGB 2 (without component)"
(
65).
– "AV2 Input" settings in the Setup menu (
 Before connection, turn off the mains for all connected equipment and read the appropriate operating
instructions.
BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3.
Adding a Digital Satellite Receiver: Connecting to a Television and a Digital Satellite
Receiver
To the aerial
Digital satellite antenna
1
The RF coaxial cable cannot be
used for showing pictures from the
unit. The unit must be connected
using another method, e.g. 21-pin
Scart cable to show pictures from
the unit on the television set.
 Aerial cable to the "RF IN" on the digital satellite receiver.
 RF coaxial cable from the "RF OUT" on the digital satellite receiver to the "RF IN" on the unit.
 RF coaxial cable (included) from the "RF OUT" on the unit to the "RF IN/AERIAL" on the TV.
 21-pin Scart cable from the "AV/VCR" on the digital satellite receiver to the "AV2 (EXT)" on the unit.
 21-pin Scart cable from the "AV1 (TV)" on the unit to the "AV" on the TV.
 21-pin Scart cable from the "AV/TV" on the digital satellite receiver to the "AV" on the TV.
To view digital satellite programmes
Refer to "Watching Digital Satellite Programmes" (
To record digital satellite programmes
Refer to "Recording from a Digital Satellite Receiver" (
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of power,
even when it is turned off.
[approx. 0.9 W ("Power Save" is set to "On")]
After completing the above connections, proceed to the TV Tuning (
65).
Digital satellite receiver
HDMI OUT
RF IN
DISH INPUT
AV/TV
RF OUT
AV/VCR
2
RF IN
RF OUT
18)
6
This unit
AV1(TV)
4
AV2 (EXT)
HDMI AV OUT
3
You can enjoy high-quality picture
by adding the HDMI cable connection
27)
13).
Additional Connections
40).
TV
HDMI IN
RF IN/AERIAL
AV
AV
HDMI IN
5
HDMI cable
12
12, 68
11
RQT9307

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents