About The Display Lamps - Olympus UFL-1 Instruction Manual

CAUTION
• This product cannot be used as the main flash.
• During underwater shooting, shooting conditions, water clarity etc. can
have a significant effect on the range of the flash. Always check your
pictures on the LCD monitor after shooting.
• Flashes from other nearby photographers may be detected and set the
product off, so be sure to turn it off when not in use.

About the display lamps

There are two types of lamps fitted to the flash.
Charge indicator lamp (red color)
The lamp lights up when the flash can be used. During charging, and when the
power is off the lamp is not lit.
Auto check indicator lamp (green color)
In the "TTL" auto shooting mode, the light sensor can be checked. If when taking
a picture the light sensor is within an operative range the lamp lights up for about
3 seconds. If the light sensor is out of an operative range, the lamp does not light.
(The flash fires fully.) After shooting, if the lamp does not light up, check your
stored photo with the LCD monitor.
Charge indicator lamp
Auto check indicator lamp
EN
EN 21