Glossary - Panasonic Viera TX-L32C10BA Operating Instructions Manual

Message
This timer will not follow the TV Guide
information
Press OK to continue, RETURN to restore
original timer
Timer already expired !
Timer Event Due to Start
DVB 1: BBC1 has been
programmed for recording at
Timer incorrect !
Timer overlap
Press OK to keep, RETURN to edit
Tuner Locked
Please stop recording to operate
Unable to download, please check
equipment
SD Card
Cannot read file
Please confirm the SD card is OK
No SD card inserted
No valid file to play
Over 9999 pictures found
(max. is 9999)
This operation is not possible

Glossary

DVB
Digital Video Broadcasting
DVD
Digital Versatile Disc
DVI
Digital Visual Interface
EPG
Electronic Programme Guide
HDMI
High-Definition Multimedia
Interface
If you edit the start time or end time of Guide link recording more than
10 minutes, it will no longer be performed as Guide link recording. The
recording will be performed according to the time setting.
Starting time in Timer Programming is already past. Set correctly (p. 44).
This message will appear 2 minutes before timer programming event due
to start.
:
Set Start and End times in Timer Programming correctly (p. 44).
Timer programming events are overlapped. If you press the OK button,
the first timer programming event will start and finish, the next timer
programming event can then start.
If you want to unlock, cancel Direct TV Recording (p. 52 and p. 54) or
Timer Programming (p. 44).
The tape or disc is active. Stop the equipment and try again.
The file is broken or unreadable.
The TV does not support the format.
(For the applicable formats and data
The inserted SD card has a problem.
Confirm SD Card is inserted correctly.
The card has no data.
Maximum valid number of photos is 9,999.
Your operation is not available.
NTSC
National Television System
Committee
One of the television signals
used in USA, etc.
RF
Radio Frequency - Signal
received from terrestrial aerial
RGB / S-Video / Video
Choose between these three
video formats depending
on personal preference and
equipment requirement
(RGB - Red, Green and Blue)
Meaning / Action
p. 61)
SCART
21 pin connection used for video,
audio and switching signals (Also
known as Euro SCART and
Peritel)
Shop viewing environment
Shop viewing environment is the
demonstration mode to explain
main features of this TV in an
easy understandable way. This
mode will work if you select
"Shop" in "Auto Setup" (p. 12).
VCR
Video Cassette Recorder
69