Panasonic Viera TX-L32C10BA Operating Instructions Manual page 31

Menu Item
Mode
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance to
Wall
Preferred Multi Audio
NICAM
HDMI1 Input
Audio Description
Volume
Speakers
Headphones
Reset to Defaults
A different menu will be displayed while SD Card is used. (p. 48)
Only available items can be selected.
Adjustments / Configurations (alternatives)
Select two different sound settings (Music / Speech)
In each Sound Mode setting, Bass and Treble can be adjusted and stored to suit your
particular sound requirement
Changes to any settings in a mode will affect all signal sources
Sound quality can be improved
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings (Off / V-Audio)
V-Audio: Provides a dynamic enhancer of width to simulate improved spatial effects
Switching is also possible by the Surround button on the remote control (p. 9).
Adjusts the volume of individual channel or input mode
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
If the back space between the TV and wall is over 30 cm, "Over 30cm" is
recommended.
If the back space between the TV and wall is within 30 cm, "Up to 30cm" is
recommended.
Selects the preferred language for digital channel multi audio (depending on the
broadcaster)
NICAM (Near Instantaneous Companded Audio Multiplex)
A format for digital sound over television
Reproduces stereo sound (Off / On)
Off if reception is poor (FM monaural sound)
Analogue mode only
Select to fit the input signal (Digital / Analogue) (p. 62)
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
HDMI input mode only
HDMI2 terminal is for digital signal only
No setting for HDMI2 available
Useful for visually-impaired viewers (Off / Auto)
Set to "Auto" to activate the description sound track if available
DVB mode only
The availability of audio description sound track is indicated by "AD" in the information
banner (p. 16).
Adjusts the volume for Audio Description
DVB mode only
Set to "On" to activate the description sound track from TV speakers (Off / On)
DVB mode only
Set to "On" to activate the description sound track from headphones (Off / On)
DVB mode only
Press the OK button to reset the present Sound Mode to the default settings
Effective to Bass, Treble, Balance, Headphone Volume and Surround
31