Panasonic Viera TX-L26C10E Operating Instructions Manual page 28

How to Use Menu Functions
Menu list
Menu
Off Timer
VIERA Link
Q-Link
AV1 / AV2 out
Power on Link
Power off Link
Standby Power Save
Intelligent Auto
Standby
Download
Child Lock
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
New Channel
Message
Signal Condition
Channel List
Auto Setup
Manual Tuning
28
Item
Sets the time the TV automatically turns Off
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Sets to use VIERA Link functions (Off / On) (p. 49)
Selects which AV terminal is to be used for data communication between this TV
and a compatible recorder (AV1 / AV2) (p. 48)
Select the connected terminal to the recorder even it is not compatible with
Q-Link.
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV2 / AV3 / Monitor)
Monitor: Image displayed on screen
Component and HDMI signals cannot be outputted.
Sets to use Power on Link function (Off / On) (p. 48 and p. 49)
Sets to use Power off Link function (Off / On) (p. 48 and p. 49)
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption (Off / On) (p. 50)
This function is available when "VIERA Link" is set to "On" and "Power off Link" is
set to "On".
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption (Off / On (With reminder) / On (No reminder))
(p. 50)
This function is available when "VIERA Link" is set to "On".
Downloads channel, language, country / region settings to a Q-Link or VIERA Link
compatible equipment connected to the TV
Locks a channel / AV input to prevent access to it (p. 36)
Creates list of favourite DVB-T channels (p. 33)
Skips the unwanted DVB-T channels or edits DVB-T channels (p. 33)
Automatically sets the DVB-T channels received in the area (p. 30)
Sets the DVB-T channels manually (p. 33)
Updates DVB-T Channel List with keeping your settings (p. 32)
Selects whether to give a notification message when a new DVB-T channel is found
(p. 32)
Checks the DVB-T signal condition (p. 32)
Skips the unwanted Analogue channels or edits Analogue channels (p. 35)
Automatically sets the Analogue channels received in the area (p. 31)
Sets the Analogue channels manually (p. 35)
Adjustments / Configurations (alternatives)