Table of Contents
Advertisement
5 Self Check
1. Self-Check is used to automatically check the bus lines and hexadecimal code of the TV set.
2. To get into the Self -Check mode press the down (
time pressing the HELP button on the remote control, and the screen will show :
If the CCU ports have been checked and found to be incorrect or not located then "--" will appear in place of "O.K.".
) button on the customer controls at the front of the set, at the same
11
TX-47P500HM / TX-47P500HQ / TX-47P500HZ / TX-47P500X
Advertisement
Table of Contents
