TX-51P800X / TX-51P800HM / TX-51P800HQ / TX-43P800X / TX-43P800HM / TX-43P800HQ / TX-43P800HZ
5 Self Check
1. Self-Check is used to automatically check the bus lines and hexadecimal code of the TV set.
2. To get into the Self -Check mode press the down (
time pressing the HELP button on the remote control, and the screen will show :
If the CCU ports have been checked and found to be incorrect or not located then "--" will appear in place of "O.K.".
) button on the customer controls at the front of the set, at the same
14