Advertisement
3.
Remove the radio (four bolts, and unplug the
connector and antenna lead).
CONNECTOR
4.
Remove the left and right radio brackets (two
washer-screws for each bracket).
RADIO
LEFT RADIO
BRACKET
WASHER-SCREW
(Reuse.)
5.
Remove the pocket (two self-tapping screws),
then separate the radio and pocket. Set the pocket
aside, it will not be used.
2 of 3
ANTENNA
LEAD
RADIO
BRACKET
BOLTS (4)
WASHER-
SCREW
(Reuse.)
RIGHT RADIO
BRACKET
SELF-TAPPING
POCKET
SCREW
BRACKET
6.
Position the CD player on the radio, and reinstall
the left and right radio brackets and four washer-
screws removed in step 4. Use four 5 x 8 mm
washer-screws (supplied) to secure the CD player
to the radio brackets.
WASHER-SCREWS
(reused)
5 x 8 mm
WASHER-
SCREW
7.
Attach the harness clip to the back of the CD
player with the remaining 5 x 8 mm washer-screw.
Plug the BUS cable into the rear of the radio/
cassette player; then fold the excess BUS cable
several times, and secure it to the back of the CD
player with the harness clip.
CD PLAYER
5 x 8 mm
WASHER-
SCREW
AII 26000 (0308)
WASHER-SCREW
(reused)
RADIO/CASSETTE
PLAYER
BUS CABLE
HARNESS
CLIP
© 2003 American Honda Motor Co., Inc - All Rights Reserved.
5 x 8 mm
WASHER-
SCREW
Advertisement
