Installation Considerations
•
For best results, Hansgrohe recommends that this unit be installed by a licensed, professional plumber.
•
Please read over these instructions thoroughly before beginning installation. Make sure that you have all
tools and supplies needed to complete the installation.
•
No drain is included with this faucet. Consult the manufacturer of the sink for recommendations regarding
a suitable drain.
•
Know and follow all applicable codes regarding the required air gap between the end of the spout and
the flood level of the lavatory sink.
Roughing in
Install two ½" NPT female fittings, spaced 3⅛" apart on
center for the hot and cold supplies. The fittings should be
recessed ⅜" behind the surface of the finished wall.
Finish and seal the wall before installing the faucet.
If required by plumbing code, install stops at an easily acces-
sible location.
Installation
Flush the hot and cold supplies.
Seal the wall with a compatible, waterproof bathroom
sealant.