Table of Contents
Advertisement
Auto Setup
Setup the wireless LAN connection
6
Setup the wireless LAN connection to enable the network service functions (p. 74).
(If you do not wish to use wireless LAN connection or the network service functions, skip this step.)
●
To setup the wireless LAN connection, use the Wireless LAN Adaptor (supplied). For the information
about the Wireless LAN Adaptor
●
Confirm the encryption key, settings and positions of your access point before starting setup. For details,
read the manual of the access point.
Start wireless LAN connection setup?
Please connect the wireless LAN adaptor (DY-WL10) to a
USB terminal.
Wireless LAN connection setup starts
Connection Type
Please select network connection type.
■
WPS(Push button)
WPS(Push button)
1) Please press the 'WPS' button on the access
point until its light flashes.
2) When the light is flashing select 'Connect' on
TV.
If you are unsure, please check the instruction
manual of the access point.
■
Search for access point
Access points found automatically are listed.
Available Access Points
No.
SSID
1
Access Point A
2
Access Point B
3
Access Point C
Encryption Key Setting
Connection will be made with the following settings:-
SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
Access Point Settings
Encryption key
A B C D E F G H
U V W X Y Z
a b c d e
u v w x
Access Point Settings
Encryption key is set to:-
XXXXXXXX
Select 'Yes' to confirm.
Select 'No' to change.
●
If the connection has failed, check the encryption key, settings and positions of your access point. And
then, follow the on screen instructions.
Exit to go to the next step
14
Yes
No
Select the connection type
WPS(Push button)
Search for access point
Press the WPS button on the access point until the light flashes.
And then, press the OK button to connect the Wireless LAN Adaptor and
the access point.
Connect
●
●
Select your desired access point
Wireless type
Encrypt
Reception
11n(2.4GHz)
11n(5GHz)
11n(5GHz)
Access the encryption key input mode
●
Enter the encryption key of the access point
Set characters one by one
I
J K L M N
O P Q R S T
0 1 2 3 4 5 6
7 8 9
!
:
#
f
g h
i
j
k
l m n
o p q
r
s
t
y
z
(
)
+
-
.
*
_
●
Select "Yes"
Yes
No
●
"Wireless LAN Adaptor" (p. 15)
connect the Wireless LAN Adaptor to the USB 1 or 2 port
Internet
environment
Access point
select "Yes"
access
access
select
Ensure that your access point supports WPS for this setup.
WPS: Wi-Fi Protected Setup™
access
select
: Encrypted access point
If the selected access point is not encrypted, the confirmation screen will
be displayed. It is recommended to select the encrypted access point.
select
set
You can set characters by using numeric buttons.
select
set
To re-enter the encryption key, select "No".
Wireless LAN Adaptor
and Extension cable
(supplied)
You can setup the wireless LAN connection later
"Network Setup" (p. 78)
EXIT
●
To skip this step
●
To search access points again
●
For the information of the
highlighted access point
●
To set manually (p. 79)
Store
BACK/
RETURN
(continued to the next page)
or select "No"
yellow
red
Advertisement
Table of Contents
