Tool Trolley Track; Micro Slot Accessories; Modesty Panel; Powerbeam - LISTAESCAN ARLINK 8000 Instructions For Assembly

Tool Trolley Track

Mounts to light brackets, with or without light. Can
be mounted in front of or behind light. Install one of
the screws and square nuts provided. Slide tool
trolley inside the track. Install the screw and nut at
the other end of the track.

Micro Slot Accessories

Accessory Cabinet, Tool Box, Shirley Bin, Sloping
Document Shelf, to name a few, can be mounted at
any desired height along the column.

Modesty Panel

Modesty Panels are hooked into the micro slots at
any convenient point on the column. Install both
sides of the panel at the same time. Push the
panel down to lock it in place.
Power Beam
Power Beams are installed by hooking the brackets
into the micro slots. Hook the cord end in first then
the opposite end.

Parts Bin Rail

Parts Bin Rails accept industries standard bins and
are available in 2", 4" and 6" depths for tiered
arrangements. Position as required in micro slots.
For large heavy bins install a second rail below for
support. Parts bin rails may be grounded by
installing a ground lead (not supplied) with a screw
through the hole in either end of the bin rail and
connect to earth ground.
Parts Bin Rail Accessories
Tool Holder, Bottle Holder, Wipes Holder, and
Solder Spool Holder. These hang anywhere along
the length of the parts bin rail.