System Connections - Panasonic WV-BM500 Operating Instruction

SYSTEM CONNECTION
1. Single Monitor Connection
Camera
Coax.
Cable
2. Multiple Monitor Connection
Camera
Coax.
Cable
Last Video Monitor
Internal Sync Connection
WV-BM500
External Sync Connection
220-240V
AC
50 Hz
WV-BM500
220-240V
AC
50 Hz
220-240V
AC
50 Hz
-8-
• Connect the Video Input Connector (11) on the
monitor to the Video Out Terminal of cameras with
75-ohm coaxial cables.
• When a non-composite video signal is connected
to the video monitor, it must also have an external
composite SYNC signal connected to the video
monitor.
• Set the Sync Selector Switch (13) at EXT position.
• Loop through connection of sync signal is the
same as the case of Video Signal.