Using Ac Adaptor - Panasonic D-Snap SV-AV100 Operating Instructions Manual

mçïÉê=pìééäó
ª Using AC Adaptor
N
Open the DC Input Socket Cover and
connect the DC Input Lead to the [DC IN
4.9V] socket on the SD Video Camera.
O
Connect the AC Mains Lead to the AC
Adaptor and the AC mains socket.
ª Charging the Battery
Be sure to charge the supplied battery before use.
1
While pressing the A part, slide it to
remove the Battery Compartment Cover.
2
Press the terminals of the battery onto
the terminals of the Battery Compartment
and set the battery.
≥Fit the battery with its label facing upward.
≥After the battery is set, close the cover.
3
Connect the DC Input Lead to the [DC IN
4.9V] socket on the SD Video Camera.
4
Connect the AC Mains Lead to the AC
Adaptor and the AC mains socket.
≥Power Lamp 1 flashes, and Charging starts.
≥When recharging, turn the power of the SD Video
Camera off.
5
Wait until Power Lamp
≥When recharging is completed, Power Lamp 1
goes off.
≥If the Power Lamp flashes quickly (or slowly) when
recharging, recharging is not normal. (l 75)
≥For other notes, see pages 73, 75.
NM
1
goes off.
O
1
2
1
4
N
3