Connecting The Aerial Cable To The Rf In Terminal; Connecting The Plug To The Wall Outlet; How To Turn The Power On - Panasonic TC-29P250H Operating Instructions Manual

Before Operating This Set

Connecting the Aerial cable to the RF In Terminal

75 Ohm
Coaxial Cable
To obtain optimum quality picture and sound, an Aerial, the correct cable (75
Ohm coaxial) and the correct terminating plug are required.
If a communal Aerial system is used, you may require the correct connection
cable and plug between the wall Aerial socket and your television receiver.
Your local Television Service Centre or Dealer may be able to assist you in
obtaining the correct Aerial system for your particular area and accessories
required.
Any matters regarding Aerial installation, upgrading of existing systems or
accessories required, and the costs incurred, are the responsibility of you, the
Customer.

Connecting the Plug to the Wall outlet

How to turn the Power On

VHF Aerial
UHF Aerial
Mixer
RF In Terminal
Note:
• Mains plug types vary between countries. The mains plug shown at left
may therefore not be the type fitted to your set.
Press the Power switch on Television to turn the set on. (See page 14)
100Hz PROGRE
MONITOR AV1 AV2 AV4
OUT IN IN IN
S-VIDEO DVD DVD
[Y-P B -P R ] [Y-P B -P ] R
VIDEO
Y Y
VIDEO
MONO MONO MONO
L L
AUDIO AUDIO
R R
Coaxial Aerial Plug
Coaxial aerial plug
RF in
Terminal
75 Ohm Coaxial Cable
7