Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Grohe 35807801
Summary of Contents for Grohe 35807801
- Page 1 Installation Instructions / Warranty Axor Steel 35807801...
- Page 2 Axor Steel Kitchen Faucet 35807801 Max water pressure Recommended water pressure Recommended hot water temp Hole size in mounting surface Max. mounting surface thickness Flow rate: *Please know and follow all applicable local codes when setting the temperature on the water heater.
- Page 3 Preparation for Installation: Turn the water supplies off before removing the old faucet. Flush the supply lines of debris before beginning installation. Damage to the cartridge caused by debris is not covered under the Hansgrohe limited lifetime warranty. Install the faucet: Position the faucet and sealing ring on top of the mounting surface.
- Page 4 Connect the handspray hose: Loosen the compression fitting on the end of the flexible handspray hose. Slide it onto the end of the handspray supply hose. While holding the hose still with a 1 mm wrench, tighten the nut with a 17 mm wrench. Do noT aLLoW THe HoSe To TWIST.
- Page 5 Set the High Temperature Limit Stop (optional): Turn off the water at the supply stops. close the drain or cover it with a cloth. Gently pry off the screw cover. Put it aside in a safe place. use a 4mm hex wrench to loosen the handle screw (4 revolutions).
- Page 6 Replacement Parts: filter handle 35891800 screw cover 9418000 flange 9750800 94194000 M3 cartridge 9730000 hose 95048000 handspray 35893800 aerator 9791000 mounting set 95049000 check valve 97350000 connection hose 9510000 hose weight 98551000 squeezing connection 9099000...
- Page 7 Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.
- Page 8 THIS WaRRanTy DoeS noT coVeR and HanSGRoHe WILL noT Pay FoR: conditions, malfunctions or damage not resulting from defects in material or workmanship. conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or () the use of abrasive or caustic cleaning agents or “no-rinse” cleaning products, or the use of the product in any manner contrary to the product instructions.