Miele KM 406 Installation Instructions Manual page 10

c
^ Arrange the bars, b, as shown in the
illustration.
^ Drill
1
/ " (1.5 mm) pilot holes through
16
the brackets and secure them using
the supplied screws.
^ Fill the gap, c, between the bars and
the countertop using the supplied
silicon sealant.
For granite countertops, the support
bars, b, can be secured with double
sided tape or construction adhesive.
Do not allow the bars to "float", they
must be securely fastened. Fill the gap,
c, between the bars and the
countertop using the supplied silicon
sealant.
The screws are not necessary for
granite countertops.
10
d
^ Place the brackets, a, as shown in
the illustration.
^ Drill two
1
/ " (1.5 mm) pilot holes for
16
each bracket and secure them using
the supplied screws.
A granite countertop must be
prepared with a hole drilled at the
position indicated to secure each
support bracket (see illustrations).
Using a piece of double sided tape or
construction adhesive press the
support brackets supplied, a, onto the
position indicated in the illustration,
flush with the top edge of the
countertop and secure each bracket
with one screw.