Switching On - Miele KM 500 Operating And Installation Instructions

Switching on

The hob must be switched on before
any of the zones can be used.
To switch the hob on:
^ Touch the ON/OFF sensor s.
0 appears in each of the cooking zone
displays. If no further entry is made, the
hob will switch itself off after a few
seconds for safety reasons.
To switch a cooking zone on:
^ Briefly touch the area under the
cooking zone display required once.
A 0 will flash in the display.
^ Whilst the 0 is flashing, select a
power setting of between 1 and 9 by
touching the - or + sensor.
To select cooking with Auto heat-up,
press the - sensor first (see "Auto
heat-up"). To select cooking without
Auto heat-up press the + sensor first.
The power setting selected flashes in
the display for a few seconds to start
with and then lights up constantly.
To change a power setting which has
already been set, touch the sensor for
the relevant zone once briefly. The
power setting can then be changed
using the - and + sensors.
Operation
17