Select Base Unit; Intercom Between Handsets - Panasonic KX-TCD755E Operating Instructions Manual

Select Base

(Select Base Unit):

V .
Z Z V
S / U U to select "Auto" or a
Z S Z
specific base unit 1 -4 (only
registered base unit numbers are
displayed).
V to confirm selection.
Z V Z
Calls (both incoming and outgoing), can
be conducted only via the selected base
unit, even if the radio cells overlap with
neighbouring base units.
Intercom Between
Handsets
You can use your handsets as a 2-way
intercom. For example, when Handset 1
calls Handset 2:
Handset 1-
N . Ï Ï is displayed.
Z N Z
B (desired handset
Z Z B
number).
Handset 2 (ringing) -
O ,N N , K K - I
Z Z O
or ^ ^ to answer.
Handset 1 and 2 -
P to end the call.
Z P Z
! Intercom calls can be conducted
within the radio cell of the current
base unit, but not with units in
neighbouring radio areas.
I , L L , _
_
Helpline Tel.No. : U.K. 08700 100 076
Transferring Calls to
Another Handset
The intercom can be used during a
call to transfer an external call
between handsets that are registered
to the same base unit.
For example, when handset 1
transfers a call to Handset 2:
Handset 1 -
During the call, Z
Ï is displayed and the call is put on
hold.
B (desired handset
Z Z B
number).
A ring back tone is heard until
Handset 2 answers.*
Handset 2 (ringing) -
O , N N , K K - I
Z Z O
or ^ ^ to answer.
Handset 1 & Handset 2 -
(Have conversation).
Handset 1 -
P to release the call for
Z P Z
transfer
OR
N to connect to external
Z N Z
caller again.
To transfer the call directly, without
speaking to the other handset:
Handset 1 -
Z P at *.
Z
Handset 2 -
Z O Z O . .
The transfer is complete.
If the transferred call is not answered
within 30 seconds, Handset 1 will
ring again. ZO to answer the call.
R.O.I. 01289 8333
N .
Z N
I , L L , _
_
31