Utility Settings; Save As Def; Preset Setting - Denon DN-SC2900 Owner's Manual

Utility settings

Select the utility setting items using the following operations.
Menu operation
1
During standby, pause, or when a file is not selected, press and hold
SEL.
flashes blue, "Utility" is shown in the 1st line, and "Save As Def." is shown in the 2nd line of
the display.
2
Turn SEL. , and select the items you want to set.
SEL.
Turn , and the item shown in the 2nd line of the display changes.
3
Press SEL.
The selected item is entered.
BACK
• To return to the previous item, press
• To exit Utility, when the utility is being displayed, press
screen.
BACK SEL. MEMO
UTIL.
MEMO UTIL.
.
MEMO UTIL.
The screen returns to the previous

Save As Def.

Saves the current pitch range settings (vpage 28), time display settings for the display (vpage 9),
playback mode settings (vpage 26) and key adjustment settings (vpage 28) as the initial settings
when the power is switched on.
CANCEL : The screen returns to the previous screen without saving the settings.
OK : The settings are saved and the screen returns to the previous screen.

Preset Setting

These settings are for unit operations or playback.
Setting items
Unit No. 1 – 14
Sets the number of this unit
NOTE
that ASIO driver recognizes
when connected to a When using multiple DENON DJ devices such as DN-SC2900, change this
setting so that there are no duplicate numbers.
computer.
Network ID 1 – 4
Sets the number of this unit
NOTE
that "engine" recognizes
If the same "Network ID" is used between different units, they cannot be
when connected to the
connected on the network. If the same network IDs are duplicated, "SET
network.
ID >>>1 (duplicated "Network ID" number)" is displayed. Set a different
"Network ID".
Touch Adjust Min/1/2/3/Max
Adjusting the touch sensor
sensitivity of the Jog wheel
(vpage 32).
Fader Mode 1L Play/Cue : If the mixer is a 1-wire mixer, raise the fader to playback, or
Switches the operation for lower it for cue standby.
fader start for the mixer 1L Play/Pause : If the mixer is a 1-wire mixer, raise the fader to playback,
connected to this unit. or lower it to pause.
2L Play/Cue : If the mixer is a 2-wire mixer, raise the fader to playback, or
lower it for cue standby.
Switch this setting to match
2L Play/Pause : If the mixer is a 2-wire mixer, raise the fader to playback,
the connected mixer.
or lower it to pause.
0 – 4 : "0" is the brightest, and "4" is the darkest.
Panel Contrast
Sets the brightness of the
display and buttons and
touch sensor indicator.
Jog Contrast 0 – 4 : "0" is the brightest, and "4" is the darkest.
Sets the brightness of the
jog wheel indicator.
44
Setting details
Default settings are underlined
Setting details