Specifications; Part 15 Of The Fcc Rules - Panasonic CQ-4400U Operating Instructions Manual

Specifications

General
Power Supply
Maximum Power Output
Power Output
Tone Action
Current Consumption
Speaker Impedance
Dimensions (W × H × D)
Weight
AM Radio
Frequency Range
Useable Sensitivity
FM Stereo Radio
Frequency Range
Useable Sensitivity
50 dB Quienting Sensitivity
Frequency Response
Alternate Channel Selectivity
Stereo Separation
Signal/Noise Ratio
Weather Band Radio
Frequency Range
Useable Sensitivity
Signal/Noise Ratio (40 dB/µV)
Tape Player
Reproduction System
Tape Speed
FF/REW Time
Frequency Response
Wow and Flutter
Signal/Noise Ratio
*Above specifications comply with EIA standards.
Note: Specifications and design are subject to modification without notice due to improvements in
technology.
Dobly noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol

Part 15 of the FCC Rules

This unit has been manufactured under the Part 15 of the FCC Rules.
Do not attempt to make any changes or modifications to this unit.
: 12 V DC (11V-16V) Test Voltage 14.4V, Negative ground
× 4 channels at 400 Hz, Volume Control maximum
: 37 W
: 18 W per channel into 4 ohms, 40 to 30,000Hz at 3% THD.
: Bass; ± 12 dB at 100 Hz
Treble; ± 12 dB at 10 kHz
: Less than 2.5 A (tape mode, 0.5W 4-speaker)
: 4 Ω (4-8 Ω acceptable)
: 7" × 1-15/16" × 5-7/8" (178 × 50 × 150 mm)
: 3 lbs (1.38 k )
: 530-1,710 kHz
: 28 dB/µV (25 µV/ S/N 20 dB)
: 87.9-107.9 MHz
: 12 dBf. (1.1 µV / 75Ω, S/N 30 dB)
: 17 dBf. (1.8 µV / 75Ω)
: 30-15,000 Hz ± 3 dB
: 75 dB
: 35 dB at 1,000 Hz
: 70 dB (Mono)
: 162.40-162.55 MHz
: 3 dB/µV (S/N 20 dB)
: 50 dB
: 4-track, 2-program stereo
: 1-7/8"/sec (4.76 cm/sec)
: Less than 110 SEC (C-60)
: 35 - 14,000 Hz ± 3 dB
: 0.09% (WRMS)
: 52 dB (Dolby NR on: 62 dB)
A are trademarks of Dolby Laboratories Licensing Corporation.
24