Electrical Connections - Panasonic CQ-4400U Operating Instructions Manual

Electrical Connections

Cautions:
This product is designed to operate with a 12-volt negative ground battery system.
To prevent damage to the unit, be sure to follow the connection diagram below.
Do not insert the power connector into the unit until the wiring is completed.
Be sure to insulate any exposed wires from a possible short-circuit from the vehicle chassis. Bundle
all cables and keep cable terminals free from touching any metal parts.
Antenna
(Gray w/black stripe)
(White
(white)
w/black
stripe)
Left Speaker
(Front)
21
Cassette Receiver
CQ-4400U
(Rear Side)
Power Connector
(Green
(Gray)
w/black
stripe)
Right Speaker
(Front)
(Red)
ACC
(Black)
Ground
(Yellow)
Battery
(Orange w/White stripe)
Dimmer
(Violet w/black stripe)
(Green)
Left Speaker Right Speaker
(Rear) (Rear)
Wired Remotoe Control Connector
(Connect to CA-RC350U)
CD Changer Control Connector
Power Lead (ACC or IGN)
To ACC power, +12V DC
Ground Lead
To a clean, bare metallic part of
the vehicle chassis
Battery Lead
To the vehicle battery, continuous
+12V DC
Dimmer Control Lead
Connect to vehicle dimmer lead
(Violet)