Power And Sound Controls - Panasonic CQ-4400U Operating Instructions Manual

Power and Sound Controls

d
d
Power
If the vehicle is not running yet, turn the key in the ignition until the
accessory indicator lights.
Press [PWR] to switch on the power.
Volume
Press the knob to select the volume mode and then turn it
clockwise or counterclockwise to increase or decrease the volume.
0 to 40
Turn the knob clockwise or counterclockwise more than 0.5
seconds to change the numeric level in sequence.
Anti-Volume-Blast Circuit
This unit has a safety function which slowly raises volume level
when power is switched back on after it is turned off at a specific
level (20) or higher.
Changing Audio Modes
Press this knob [SEL] to change the audio mode as follows.
VOL
(Volume)
c
FADE
(Fader)
Bass and Treble
Press the knob to select the BASS(TREBLE) mode and then turn it
clockwise or counterclockwise to increase or decrease the
bass/ treble level.
-12 to 12
Volume Level
BASS
a a
b
TRE
(Treble)
d
BAL
(Balance)
-12 to 12
4