Reset Base Unit Settings - Panasonic KX-TCD735EM Operating Instructions Manual

KX-TCD735EM(E)-3(50~75)

Reset Base Unit Settings

with the Handset
This function enables the base unit to clear the following settings at one time. They will return to their
initial settings.
Function
Ringer mode selection
Number of rings
(Selected then all handsets)
Time Break Recall/Earth
Pause timing
Call restricted
handset(s)
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1
Press .
2
Press or until the arrow points
to "Setting Base", then press
"Input Command" is displayed.
3
Press 0 , then enter the 4-digit base
unit PIN (p. 67).
I n p u t C o m m a n d
12 - - - - - - - - - - - -
01.10.22 16:15 Page 75
Initial setting
All handsets Call restriction
3 number(s)
4-digit base unit PIN
Time Break Recall Base unit ringer volume
3 seconds Base unit ringer type
All clear Key tone
4
Press
A beep sounds.
The display will return to "Setting
Base". To return to the standby mode,
.
press
You can exit the programming mode any time
by pressing
Function Initial setting
All clear
0000
2 (MEDIUM)
1
ON
.
.
.
75