Tapes - Panasonic RX-CT60 Operating Instructions Manual

Tapes

RX-CT65
3 2 1
OPERATION/BATT
Use normal position/TYPE I tape only.
Tape can be played either DECK 1 or DECK 2.
Follow steps 1 to 3.
OPR OFF
In step 1: Set to "TAPE/
In step 2: Insert the tape with the side to be played facing out (
by hand.
• Tapes exceeding 100 minutes are thin and can break or get caught in the
mechanism.
• Tape slack can get caught up in the mechanism and should be taken up
before playing the tape.
• Endless tapes can get caught up in the mechanism if used incorrectly.
"OPERATION/BATT" indicator(s)
RX-CT65
DECK 1: Lights while tape is travelling.
DECK 2: Shows the selected play side.
RX-CT60
Lights while the tape is travelling.
To stop play
Press [ STOP/EJECT].
To pause play
Press [ PAUSE].
Press once again to resume play.
To fast-forward or rewind (while stopped)
Press [ REW/REV] (or [ FAST]) or [
RX-CT65 only
Press [ STOP/EJECT] to release the button when the tape reaches the
end.
To cue or review (during play)
Press [ REW/REV] or [ FF/CUE].
To play relay (DECK 2 to DECK 1)
When Deck 2 play has finished, Deck 1 play starts automatically.
Insert the tapes into Deck 1 and Deck 2.
RX-CT65 only
Set Deck 2 [REV MODE] to "
Press Deck 2 [ PLAY] or [
Press Deck 1 [ PAUSE], then press [
RX-CT65 only
To select the appropriate reverse mode
Press [ REV MODE].
:
Both sides are played repeatedly until [
:
Both sides are played once.
To select the play side
Press [ DIRECTION].
Caution
Sound quality may be effected and the cassette tape may become
stuck if you do not adhere to the following.
• Do not use other stickers not included with the cassette tape.
• Place stickers on the cassette tape only as indicated.
3 2
SELECTOR
CD/
LINE IN
RADIO
TAPE/
".
) and close
FF/CUE] (or [ FAST]).
".
PLAY].
PLAY].
STOP/EJECT] is pressed.
RX-CT60
3 2
OPERATION/BATT
1
SELECTOR
CD/
LINE IN
RADIO
TAPE/
7
RQT7611