Other Function - Panasonic NV-FJ732F Operating Instructions Manual

Other Function

Indications that Can Be Displayed on the
TV Screen
At a press of the [OSD/DISPLAY]
(18), the following indications
appear on the TV screen.
1) TV station name
2) STEREO, M1 and M2 Indicator
When receiving a TV
programme with the Stereo,
Bilingual or NICAM sound
system, the type of sound
system in which it is broadcast is automatically
indicated.
STEREO: When receiving a Stereo/NICAM stereo
broadcast.
M1/M2: When receiving a Bilingual/NICAM dual-
sound broadcast.
M1: When receiving a NICAM monaural
broadcast.
3) Sound mode during playback (L/R)
At each press of the [AUDIO] (17), the selected
playback sound is indicated with L (Left) and R (Right).
Stereo playback:
The L and R indications are displayed.
Left audio channel playback:
The L indication alone is displayed.
Right audio channel playback:
The R indication alone is displayed.
Playback of normal audio track:
Neither L nor R indication is displayed.
4) Tape speed indicator
5) Tape running display
6) Present time/Tape counter/Remaining tape time/
Index Search/One-Touch Recording (OTR)/
Playback Off Timer Function
Present time
Tape counter
Remaining tape time
Index Search
One-Touch Recording (OTR)
Playback Off Timer Function
Notes:
• If [OSD] is set to [OFF], none of the above indications appear.
• None of the above indications appear during special playback.
• During playback and when the AV input for the external source is
selected, indications 1 and 2 do not appear.
• Some of the above indications do not appear when using NTSC
tapes.
20
To Play Back NTSC Video Cassettes on
Your PAL TV
(Quasi-NTSC Playback Function)
(For NV-FJ732F and NV-FJ632F)
This VCR allows playback of tapes recorded in the NTSC
system on a normal PAL system TV with the same
operations as usual.
TF1 On some TVs, however, the playback picture may roll up or
STEREO L R SP
down.
• If your TV has a V-HOLD control or equivalent adjustment
Crystal View Control Super (CVC Super)
0:00:29
The crystal view control function ensures that you always
obtain the optimum picture quality so that you get the best
picture automatically.
While the VCR is turned on, the [CVC] indication is always
displayed to show that the Crystal View Control Super is
activated.
Child Lock Function buttons
([OK] (24) and [OFF (i)] (22))
This function deactivates all buttons on the VCR and the
remote control. Use this function, when you do not want
other people to operate the VCR.
To Activate the Child Lock Function
Hold down the [OK] (24) and the [OFF (i)] (22)
simultaneously until the [!" hold] indication appears in the
VCR display.
• If you press a button while the Child Lock function is on, the
To Cancel the Child Lock Function
Hold down the [OK] (24) and the [OFF (i)] (22)
simultaneously until the [!" hold] indication disappears.
• If you disconnect the power cable, the Child Lock function
• If you cannot cancel the Child Lock function, press the
NICAM Broadcasting System
NV-FJ732F, NV-FJ632F and NV-FJ628F feature the NICAM
digital sound system, a 2-channel sound broadcast system
17:24:31
that provides either 2 high-quality stereo sound tracks or 2
– 2:35.47
independent mono sound tracks, M1 and M2.
NICAM programmes are always accompanied by standard
REMAIN: 2:34
(mono) sound broadcasts, and during playback, you can
5 02
select the desired sound with the [AUDIO] (17).
• The NICAM stereo sound can only be recorded on the Hi-Fi
OTR 60
30
• If, for some reason, you want to record a stereo, bilingual or
function, use it to try to stop the picture movement.
[!" hold] indication appears in the VCR display to inform
you that no operation is possible.
is automatically cancelled after the power backup time of
approximately 60 minutes has elapsed.
[EXIT] (27) and perform the operation.
audio tracks.
NICAM TV programme intentionally in mono on the Hi-Fi
audio tracks, set [Mono] to [ON] for the programme position
on which the desired programme is broadcast, as
described on page 17.