Panasonic SV-SD770V Operating Instructions Manual page 28

To set the section to repeat in
[A-B REPEAT]
1. Select [A-B REPEAT] during
play.
2. Press 1/∫ at the start point (A)
and once more at the end point
(B) in the same track.
≥ The section that you set must be
more than 1 second.
≥ This is cancelled if skip or stop is
selected.
≥ It may not be possible to set the
start point (A) during play if the
track is near the end
(approximately 5 seconds).
[EQ]
≥ [NORMAL]: Normal
≥ [S-XBS1]:
≥ [S-XBS2]:
≥ [TRAIN]:
[EFFECT]
≥ [RE-MASTER]: Compensates for
— This effect may be less with
high bit rates.
≥ [P.SRD1]:
≥ [P.SRD2]:
≥ [OFF]:
— Noise may be heard when some
[EQ] and [EFFECT] settings are
28
combined.
RQT8630
Add powerful bass
Enhanced
[S-XBS1] effect
Reduces sound
leaks and listening
fatigue
high frequencies
lost through
compressed
recording
Personal surround
(3D sound field
with presence)
Enhanced
[P.SRD1] effect
Normal
[RESET MARK]
Press i or j to select [YES] to
reset the registered mark.
— When you set [AUDIO
SEARCH] to [MARKED
TRACK] and then play a track
(P26), [RESET MARK] is not
displayed.
— If the registered mark cannot be
reset on this unit, select
[PRIVATE]>[MEIGROUP]>
[SDPLAYER] in the SD Memory
card on the PC. Select
[MARKLIST.LST] in
[SDPLAYER] and then delete it.
[SYSTEM]
The settings on this unit can be
changed.
≥ [BEEP]
— [ON]:
A beep is heard when you
press an operation button.
— [OFF]:
A beep is not heard.
≥ [TOUCH SLIDER]
— [ON]:
Using touch slide function
— [OFF]:
Not using touch slide function
≥ [LANGUAGE]
— [ENGLISH]: English
— [ ]:
Simplified Chinese
— [ ]:
Traditional Chinese