Display Language; Setting The Date And Time - Panasonic KX-TCD150F Operating Instructions Manual

TCD150FX(e-e).book Page 7 Thursday, June 9, 2005 6:59 PM
Symbols used in this
manual
These are the symbols that will navigate
through these operating instructions.
Symbol Meaning
Press {j/OK}.
{j/OK}
Proceed to the next
i
operation.
" " Press {e} or {v} to select
the words in quotations
shown on the display.

Display language

To change the display language
1
{j/OK}
2
"SETTING HS" ({v}) i {>}
3
"DISPLAY OPT" i {>}
4
"LANGUAGE" i {>}
5
Select the desired language. i {>}
i {ih}
Note:
L If you select a language you cannot read,
reset the handset to its default settings:
− {j/OK} i {v} i {>} i {e}
i {>}
− Enter handset PIN (default: "0000").
− {v} i {>} i {ih}
Setting dialling mode
(tone/pulse)
Change the dialling mode depending on
your telephone line service.
"1" (Tone): Select when you have a touch
tone service.
"2" (Pulse): Select when you have pulse
service.
1
{j/OK}
2
"SETTING BS" ({v}) i {>} i {3}
3
Enter base unit PIN (default: "0000").
L If you changed PIN, enter it (page 12).
4
{1}
5
Select the desired setting by pressing {1}
for tone dialling mode or {2} for pulse
dialling mode.
6
{>} i {ih}

Setting the date and time

Important:
L Confirm that the AC adaptor is connected.
1
{j/OK}
2
"SETTING BS" ({v}) i {>} i {*}
3
Enter the current hour and minute (24-
hour time entry).
L If you make a mistake, press {C}.
Digits will be cleared from the right.
4
{>} 2 times i {*} 2 times
5
Enter the current day, month and year.
L If you make a mistake, press {C}.
Digits will be cleared from the right.
6
{>} i {ih}
Preparation
7