Table of Contents
Advertisement
2
Remove the paper tray cover (1).
3
Remove the recording paper (1), then
remove the drum and toner unit (2) to allow
the jammed paper (3) to pull free from the
rear cabinet.
3
4
Lift both green levers (1) forward until they
stop.
1
1
1
2
5
Remove the jammed paper (1) from the
fuser unit by pulling it upwards carefully, then
install the drum and toner unit.
6
Push back the levers (1) to the original
position.
1
7
Close the front cover (1) by pushing down
on both sides, until locked.
1
8
Pull the tension plate forward (1), then re-
insert the recording paper (2).
9. Help
1
73
Advertisement
Table of Contents
