Table of Contents
Advertisement
9. Help
Display
"PAPER JAMMED"
"PC FAIL OR BUSY"
"PLEASE WAIT"
"POLLING ERROR"
"REDIAL TIME OUT"
"REMOVE DOCUMENT"
"REPLACE DRUM"
"CHANGE SUPPLIES"
"RX MEMORY FULL"
"TONER EMPTY"
"CHANGE SUPPLIES"
"TONER LOW"
"CHANGE SUPPLIES"
"TRANSMIT ERROR"
"WARMING UP"
"WRONG PAPER"
62
Cause & Solution
L A recording paper jam occurred. Clear the jammed paper (page
72).
L The cable or the computer power cord is not connected correctly.
Check the connections (page 44).
L The software is not running on the computer. Restart the software
and try again.
L The unit is warming up. Wait for a while.
L The other party's fax machine does not offer the polling function.
Check with the other party.
L The other party's fax machine is busy or has run out of recording
paper. Try again.
L The document is jammed. Remove the jammed document (page
75).
L Attempted to send a document longer than 600 mm. Press
{STOP} to remove the document. Divide the document into two or
more sheets and try again.
L The drum life is complete. Replace the drum unit immediately
(page 69).
L The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper (page 16)
or clear the jammed paper (page 72).
L The toner life is complete. Replace the toner cartridge immediately
(page 69).
L The toner life is near to an end. Replace the toner cartridge as
soon as possible (page 69).
L A transmission error occurred. Try again.
L The inside of the unit is cold. Let the unit warm up. Wait for a while.
L The fax message was printed on paper which is shorter than A4
size paper. Use the appropriate size paper (page 80).
Advertisement
Table of Contents
