Specifying The Scan Settings; Available Settings - Konica Minolta BIZHUB 750 Function Manual

Scanning Documents
3.6

Specifying the Scan Settings

Available Settings

Detailed scan settings can be specified by touching [Scan Settings] in the
Scan mode screen.
The settings that can be specified are as follows:
Item
File Type
Resolution
Simplex/Duplex
Original Type
Scan Size
Zoom
Density
Original Setting
bizhub 750/600 (Phase 2)
Description
Selects the file type for saving the
scanned data.
Selects the scan resolution.
Selects whether to scan one side of
the document or both sides.
Sets the image type of the scanned
document.
Sets the paper size to be scanned.
Sets the zoom ratio for scanning.
Frequently used zoom ratios can be
stored.
Specify the density for scanning.
Specifies the type of document that
is loaded, for example, if it contains
mixed page sizes or is folded in a
zigzag.
Reference
"File Type" on page 3-51
"Resolution" on page 3-54
"Simplex/Duplex" on page 3-55
"Original Type" on page 3-56
"Scan Size" on page 3-57
"To specify the zoom ratio for
scanning (Zoom setting)" on
page 3-61
"Density" on page 3-63
"Original Setting" on page 3-64
3
3-49