Panasonic TXL42DT60Y User Manual page 56

3D Signal Message
(On / Off)
Selects whether to give a notification message when a signal of 3D format is
found or not.
Not valid when 3D Detection
●
For DVB, Component and HDMI input
●
2D 3D Depth
(Max / Mid / Min)
Selects a level of 3D-image depth for viewing converted 2D images.
3D Adjustment
(On / Off)
Adjustment of the 3D effect (except in
Set to On to enable
When setting to On, a safety precaution message will appear. Read it
●
carefully and press
When adjusting, take into account that the vision of 3D images varies
●
among different individuals.
Effect:
Adjusts the 3D depth according to the contents or to your preference.
(This setting will not be memorised when changing the input mode or
channel.)
L/R Picture Swap
(L/R (Normal) / R/L (Reversed))
Swaps pictures for left eye and right eye (except in
Select R/L (Reversed)
This setting will not be memorised when changing the input mode or
●
channel.
Edge Smoother
(On / Off)
Set to On if you feel the contoured parts of an image are not smooth enough
(except in 2D 3D mode).
is set to
2D 3D
Effect setting.
BACK/RETURN to go to
if you feel that the sense of depth is unusual.
- 56 -
On (Advance)
mode).
Effect setting.
2D 3D mode).