Digital Tv - Panasonic TXL42DT60Y User Manual

Digital TV

Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Block noise, frozen or disappearing image occurs / Some channels cannot be
tuned
Check the position, direction and connection of the aerial or dish.
●
Check Signal Condition. If
●
signal is weak. Connecting the aerial to the TV directly may improve signal
quality than connecting the aerial through the equipment (set top box,
DVD, etc.).
Watching
Watching
Weather conditions will affect signal reception (heavy rain, snow, etc.),
●
in particular in poor reception areas. Even during good weather, the high
pressure can cause poor reception of some channels.
Due to the digital reception technologies involved, quality of the digital
●
signals may be relatively low in some cases, despite good reception of
analogue channels.
Turn the TV off with Mains power On / Off switch, and then on again.
●
If the problem persists, consult your local dealer or service provider for the
●
availability of services.
DVB-S Auto Setup cannot be done completely
Check connections and dish alignment.
●
Watching
If the problem persists, consult your local dealer.
●
Faulty dish message appears
The satellite cable may be short-circuited or there may be connection
●
problems of the cable. Check the cable and connection and then turn the
TV off with Mains power On / Off switch, and turn it on again.
If the message persists, consult a dish installer for checking the dish and
●
cable.
Signal Quality
Tuning and editing channels
Basic Basic connection
Basic Basic connection
- 201 -
is displayed in red, the DVB
Signal Condition