Recording To A Card; Cards That You Can Use With This Unit; Inserting/Removing A Microsd Card - Panasonic HX-A100 Basic Operating Instructions Manual

Recording to a card

This unit can record motion pictures or still pictures to a microSD card.

Cards that you can use with this unit

Use microSD Memory Card (512 MB/1 GB/2 GB) or microSDHC Memory
16 GB/32 GB) conforming to Class 4
picture recording.
≥ Operation of microSD cards other than described above is not guaranteed.
*1 SD Speed Class Rating is the speed standard regarding
continuous writing. Check via the label on the card, etc.
*2 Use microSD cards conforming to Class 6 or higher of the SD Speed Class Rating for
"Slow motion mode". If you use microSD cards conforming to Class 4 or less of that, the
recording may stop suddenly.
≥ Please check the latest information on the support website below.
http://panasonic.jp/support/global/cs/e_cam/index.html
(This website is in English only.)
≥ Keep the Memory Card out of reach of children to prevent swallowing.

Inserting/removing a microSD card

Caution:
Check that the access lamp A has gone off.
≥ When this unit is accessing the microSD card (such as recognition, recording, playback and
deletion), the access lamp lights up.
B
C: Unlocked when the red indicator is visible
1
Slide the LOCK switch B to the left to unlock the side cover and
slide the side cover downward to open it and then insert (remove)
the microSD card into (from) the card slot.
≥ Face the terminal side D upward and press it straight in as far as it will go.
≥ Press the centre of the microSD card and then pull it straight out.
2
Close the side cover and slide the LOCK switch B to the right to lock it.
≥ Close the side cover and slide it upward and then lock it.
≥ Securely close it until it clicks.
16
VQT4X90
*2
or higher of the SD Speed Class Rating
C
e.g.:
D
Card
(4 GB/8 GB/
*1
for motion

A