Adjusting Volume; Date And Time - Panasonic KX-FP701FX Operating Instructions Manual

2. Preparation
Volume

2.3 Adjusting volume

Ringer volume
While the unit is idle, press {A} or {B}.
L If there are any documents in the document
entrance, you cannot adjust the volume. Confirm that
there are no documents in the entrance.
To turn the ringer OFF
Press {B} repeatedly to display "RINGER OFF= OK?".
i {SET}
L The unit will not ring.
L To turn the ringer back ON, press {A}.
Ringer tone
L You can select the ringer tone from one of 3 patterns
(feature #17 on page 30).
Handset receiver volume
While using the handset, press {A} or {B}.
Speaker volume
While using the monitor, press {A} or {B}.
14
{SET}
{A}{B}
Initial Programming

2.4 Date and time

{MENU}
1
{MENU} i {#}{0}{1} i {SET}
2
Enter the current date/month/year/hour/minute by
selecting 2 digits for each. Press {*} repeatedly to
select "AM", "PM", or 24 hour clock format.
Example: 10 August, 2007 10:15PM (12 hour
clock format)
1. Press {1}{0} {0}{8} {0}{7} {1}{0} {1}{5}.
2. Press {*} repeatedly to select "PM".
3
{SET}
4
Press {MENU} to exit.
Note:
L The other party's fax machine will print the date and
time on the top of each page you send according to
your unit's date and time setting.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
{SET}
{<}{>}
D:| 0 1/M:01/Y:07
TIME: 00:00
D:| 1 0/M:08/Y:07
TIME: 10:15