Table of Contents
Advertisement
Ambient Sensor
1. Display the menu with
2. Select
Picture
3. Select
On
/
Off
with
Ambient Sensor
(On
/ Off)
Automatic Brightness Control function
●
Adjusts picture settings automatically depending on ambient lighting
conditions.
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
Off Timer
is active.
●
Watching
No operation is performed for 4 hours while
●
Settings
No signal is received and no operation is performed for 10 minutes while
●
No signal Power off
Settings
Aspect
Change the aspect ratio (image size) with ASPECT.
■
To change the aspect ratio manually
1. Display
Aspect Selection
2. Select the mode with
You can also change the mode pressing ASPECT.
●
(Press repeatedly until you reach the desired mode.)
Auto:
The best ratio is selected automatically according to the "Aspect Control
Signal".
Watching
16:9:
Directly displays the image at 16:9 without distortion (anamorphic).
MENU
Ambient Sensor
with
/
and press
Basic
Off Timer
Timer
Auto Standby
is set to On.
Timer
No signal Power off
list with
ASPECT
/
and press
For best picture
Aspect Control Signal
- 31 -
/
and press
OK
OK
to set
Auto Standby
OK
to set
to access
is set to On.
Advertisement
Table of Contents
