Table of Contents
Advertisement
Keep the TV away from electronic equipment (video equipment, etc.) or
●
equipment with an infrared sensor, otherwise distortion of image / sound
may occur or operation of other equipment may be affected.
When using a SCART or HDMI cable, it is recommended to use fully wired
●
one.
Check the terminal type and cable plugs are correct when connecting.
●
Selecting channel
1. Display the
TV Selection
2. Select the mode with
DVB-C
/
DVB-T
/
The selectable modes vary depending on the channels stored.
●
You can also select the mode pressing
●
control or INPUT/OK/HOLD for MENU button on the control panel of
the TV.
If the
TV Selection
●
3. Select a channel with Channel Up / Down or numeric buttons
Press the numeric buttons to select a channel position with 2 or more-
●
digit (e.g. 399, press
■
To select a channel from the channel list
1. Display the channel list with
2. Select a channel from the list with
To sort channel names in alphabetical order
●
(red)
To change the category
●
(blue)
■
To select a channel using information banner
1. Display information banner with
2. Select a channel with
displayed
Watching
screen with
TV
/
and press
Analogue
menu is not displayed, press
).
OK
/
if it is not displayed
/
and press
Basic
Information banner
- 15 -
OK
to set
TV
repeatedly on the remote
TV
to switch the mode.
and press
OK
to watch
OK
to watch while the banner is
Advertisement
Table of Contents
