Lamp Replacement; Important Warnings - LG Refrigerator-Freezer Owner's Manual

LAMP REPLACEMENT

1. Unplug the power cord from the outlet.
1. Unplug the power cord from the outlet.
2. Remove refrigerator shelves.
2. Remove refrigerator shelves.
3. To remove the lamp cover, insert
of the lamp cover and pull it out forwards.
3. To remove the lamp cover, insert
of the lamp cover and pull it out forwards.
4. Turn the lamp counterclockwise.
4. Turn the lamp counterclockwise.
5. Assemble in reverse order of disassembly. Replacement bulb must be
the same specification as original.
5. Assemble in reverse order of disassembly. Replacement bulb must be
the same specification as original.

IMPORTANT WARNINGS

DO NOT USE AN EXTENSION CORD
If possible, connect the refrigerator to its own
individual electrical outlet to prevent it and other
appliances or household lights from causing an
overload that could cause a power outage.
ACCESSIBILITY OF SUPPLY PLUG
The refrigerator-freezer should be so positioned
that the supply plug is accessible for quick
disconnection when accident happens.
SUPPLY CORD REPLACEMENT
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a
hazard.
VERY DANGEROUS ATTRACTION
An empty refrigerator can be a dangerous
attraction to children. Remove gaskets, latches,
lids or the entire door from your unused
appliance,or take some other action to make it
harmless.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
Disposal of the old appliance
This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials which are reusable
and/or recyclable.
All the important materials should be sent to the collection center of waste material and can be reused after
rework (recycling). For take back, please contact with the local agency.
type driver at the one of under hole
type driver at the one of under hole
ABOUT GROUNDING (EARTHING)
In the event of an electric short circuit, grounding
(earthing) reduces the risk of electric shock by
providing an escape wire for the electric current.
In order to prevent possible electric shock, this
appliance must be grounded.
Improper use of the grounding plug can result in
an electric shock. Consult a qualified electrician or
service person if the grounding instructions are not
completely understood, or if you have doubts on
whether the appliance is properly grounded.
DO NOT MODIFY OR EXTEND THE
POWER CORD LENGTH
It will cause electric shock
or fire.
This appliance must be grounded (earthed).
NEVER STORE EXPLOSIVES AND CHEMICALS
WARNING
16
DON'T WAIT! DO IT NOW!