Axis OfficeBasic USB Wireless User Manual page 17

Setup in Windows NT
1. Configure according to the description in Print Server setup
for Windows, on page 10 until you reach Figure: Select an
already configured printer or click Add New Printer, on page
13. Click Add New Printer to launch Windows Add Printer
Wizard.
2. Select My Computer and click Next.
3. Select LPT1 as Local Port and click Next.
4. Select Printer Manufacturer and Printer model, click Next and
Finish.
5. In the AXIS OBW Wizard, select the newly added printer from
the list, click Next and Finish to complete the installation.
6. From Windows, go to Start | Settings | Printers and highlight
your newly installed printer.
7. Right-click, select Properties and verify that the AXIS
OfficeBasic USB Wireless port appears as OBWXXXXXX-1 (the
Xs represent the last six digits of the print server's serial
number).
8. Print a test page to verify the configuration.
See the AXIS OfficeBasic USB Wireless User's Manual for alternative
Windows configuration methods. The User's Manual is located on
the AXIS OfficeBasic USB Wireless CD and on www.axis.com
16