Auto Operation Mode (Heat Pump Type); Fan Operation Mode - LG Air Conditioner Owner's Manual

Operating Instructions

Auto Operation Mode (Heat Pump Type)

9
The setting temperature
can be changed, when
the set temperature
button is pressed.
Auto Change Over Operation(Pair system):
❏ You can switch the indoor fan speed.
❏ The system will automatically switch from the cooling mode to the heating mode, or from heating to cooling,
when you select Auto Opration mode.
Auto Operation(Multi system or Simultaneous system):
❏ You can switch the indoor fan speed.
❏ If the system is not operating as desired, manually switch to another mode. The system will not automatically switch
from the cooling mode to the heating mode, or from heating to cooling, then you must set the mode and the desired
temperature again.

Fan Operation Mode

This funcion is used to circulate room air without cooling or heating.
1
Press the On/Off Button.
2
Press FAN Operation Button.
3
Each time Fan Speed button is pressed, the fan speed mode is changed.
14 Ceiling Cassette-Type Air Conditioner
AUTO SWING OPERATION SET TEMP FAN SPEED SUB FUNCTION
Room Temp
Time
Timer Operation unit Program set
On Off
Set no. Time 01 03 05 07 09 11 13 15
• The temperature can be set
HI AUTO Heater Preheat
within a range of 18°C~30°C
MED JET Defrost Humidify
LO
Filter Out door
by 1°C.
ZONE 1 2 3 4
17 19 21 23
To raise the Temperature.
To lower the Temperature.
AUTO SWING OPERATION
Timer Operation unit
On Off
01 03 05
Set no. Time
SET TEMP FAN SPEED SUB FUNCTION
Room Temp
HI AUTO Heater Preheat
MED JET Defrost Humidify
LO Filter Out door
Time ZONE 1 2 3 4
Program set
07 09 11 13 15 17 19 21 23