Advertisement
Installation
1. INSTRUCTION
Unpack the refrigerator and locate at desired location.
Refrigerator should be located properly in ventilated area.
2. LEVELLING
Levelling of refrigerator should be done with front leg. Refrigerator should be levelled with front to back inclination for
base.
200mm
Operation
Refrigerator Temperature Control
Specially designed knob gives your facility to control temperature inside
Refrigerator.
Defrosting
It is natural for moisture in the air to condense on the cold surface. This leads to a
regular build up of frost on the surface of the freezer and the cooling in the fresh
food compartment. This frost accumulation reduces the cooling effect, thereby
reducing efficiency. Therefore, periodic defrosting is necessary to ensure
optimum performance.
The water in the drain tray evaporates by natural evaporation if defrosting is
done once in two days. However, due to varied conditions of usage it is
desirable to check the drain-tray occasionally and dispose of the water, if any,
Please ensure that the chiller tray is in its correct position by pushing it to its
correct position by pushing it to its extreme. Otherwise the defrosting water
may fall over the contents of the refrigerator.
Manual Defrosting : However in some models, in case of defrosting or power
failure the water directly accumulates in chiller tray, dispose off water directly
from chiller tray by taking it out.
ICE MAKING
Fill ice trays with water, place in Freeze Box.
To remove ice cube, gently twise Ice Tray.
200mm
200mm
EARTHING
220V~240V - 50Hz
Use electrical connection
with 3-pin for earthing.
2
STARTING
Normal
Min
Off
DEFROST KNOB
Before loading let run refrigerator
for 24 hrs. in normal position.
TEMPERATURE SETTING
Normal
Min
Off
DEFROST KNOB
DEFROST
INDICATOR
Note : Push the Defrost Knob after every 2
days / Ice Level reaches defrost indicator.
Max
Max
Hide quick links:
Advertisement
