Demo Function - Panasonic SC-VK72D Operating Instructions Manual

CLOCK/
TIMER
, ,
,
SHIFT

DEMO function

DISPLAY
DEMO
STEP
The QUICK SETUP screen assists you to make necessary
settings.
Turn on the television and select the appropriate video input on
the television.
1
Press [: : : : : , DVD/CD] to select "DVD/CD" as the
source.
The unit comes on.
Press [L L L L L ] when a disc is in the tray.
2
Press [SHIFT] + [SETUP] to show the QUICK
, DVD/CD
SETUP screen.
3
Follow the messages and press [8 8 8 8 8 , 9 9 9 9 9 , ; ; ; ; ;, : : : : : ] to
select, then press [ENTER] to make the settings.
, , , ,
Press [RETURN] to go back to the previous screen.
4
Press [ENTER] and then [SHIFT] + [SETUP] to end
RETURN
the settings.
SETUP
STEP
This is a 24-hour clock.
1
Press [CLOCK/TIMER] to select "CLOCK".
Every time you press the button:
CLOCK
Previous display
2
(within 7 seconds or so)
Press [g
3
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.
To display the time
Press [CLOCK/TIMER] once when the unit is on or at standby
mode.
The time is shown for about 5 seconds.
Note
Reset the clock regularly to maintain accuracy.
When the unit is first plugged in, a demonstration of its functions
may be shown on the display.
If the demo setting is off, you can show a demonstration by
turning on the demo.
Press and hold [DISPLAY –DEMO].
The display changes each time the button is held down.
DEMO OFF (off) ↔ DEMO ON (on)
You can reduce the power consumed in standby mode by
turning the demonstration off.
6
QUICK SETUP
7
Setting the time
PLAY REC
g g f f
g , REW/4 4 4 4 4 ] or [f g f , 3 3 3 3 3 /FF] to set the time. f
9
RQT8169