Panasonic SC-VK72D Operating Instructions Manual page 21

L L L L L "Video" tab
TV Aspect
Choose the setting suit your television
and preference.
TV Type
Select to suit the type of television.
Time Delay
When connected with a Plasma display,
adjust if you notice the audio is out of sync
with the video.
Still Mode
Specify the type of picture shown when
paused.
NTSC Disc Output
Choose PAL 60 or NTSC output when playing
NTSC discs (A page 4, Video systems).
L L L L L "Audio" tab
Dynamic Range Compression
Speaker Settings (A see below)
Set the delay time for your center and
surround speakers.
L L L L L "Display" tab
Menu Language
On-Screen Messages
L L L L L "Others" tab
QUICK SETUP
\5
Re-initialize Setting (or Re-initialise
\6
Setting )
This returns all values in the Setup menus
off and on again.
\5
For Southeast Asia
Changing the delay time (Speaker Settings)
(Effective when playing multi-channel audio)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers, except
for the subwoofer, should be the same distance from the seating
position. If you have to place the center or surround speakers closer
to the seating position, adjust the delay time to make up for the
difference.
C
: Actual speakers position
L C R
: Ideal speakers position
a
c
abc
SW
b
LS RS
Approximate room dimensions
LS RS
Circle of constant primary listening distance
a b
If either distance or is less than
table and change to the recommended setting.
a
Center speaker
Difference (Approx.) Setting
30 cm 1.0 ms
60 cm 2.0 ms
90 cm 3.0 ms
120 cm 4.0 ms
150 cm 5.0 ms
•
4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen
(unless prohibited by the disc).
•
4:3 Letterbox: Regular aspect television (4:3)
Widescreen software is shown in the letterbox style.
•
16:9: Widescreen television (16:9)
•
Standard (Direct View TV)
•
CRT Projector
•
Projection TV
• •
0ms
•
Automatic
• Field: The picture is not blurred, but picture quality is lower.
•
Frame: Overall quality is high, but the picture may appear blurred.
•
PAL60: When connected to a PAL television.
•
NTSC: When connected to an NTSC television.
(
For Saudi Arabia, Kuwait, Australia and N.Z.
•
Off
•
On: Adjust for clarity even when the volume is low by compressing the range of the
lowest sound level and the highest sound level. Convenient for late night viewing.
(Only works with Dolby Digital)
•
Center (C):
•
Surround (LS/RS): 0.0/5.0/10.0/15.0 ms
\5 • •
English
\6 • •
English
•
On
• Yes
•
Yes: The password screen is shown if Ratings (A page 20) are set. Please enter the
same password. After "INIT" on the display disappears, turn the unit to the default
settings.
•
No
\6
For Saudi Arabia, Kuwait, Australia and N.Z.
: Primary listening distance
c
, find the difference in the
b
Surround speaker
Difference (Approx.) Setting
150 cm 5.0 ms
300 cm 10.0 ms
450 cm 15.0 ms
•
LCD TV/Projector
•
Plasma TV
• • •
20ms 40ms 60ms
: "PAL60" is the factory preset)
0.0/1.0/2.0/3.0/4.0/5.0 ms
• • •
Français Deutsch Italiano
•
Off
• No
1 Press [8 8 8 8 8 , 9 9 9 9 9 ] to select the delay time box and press
[ENTER].
2 Press [8 8 8 8 8 , 9 9 9 9 9 ] to adjust the delay time and press
[ENTER].
Center delay time
L
Exit
Exit
LS
Surround delay time
To finish the speaker setting
Press [;] to select "Exit" and press [ENTER].
•
80ms 100ms
• •
Español Português Pуcский
R
ms
C
0.0
SW
ms
RS
0.0
•
Nederlands
21
RQT8169