Table of Contents
Advertisement
Onscreen Icons
The phone screen displays several onscreen icons
which appear when the phone is powered on.
Icons
Descriptions
Displays the strength of the signal received
by the phone and current signal strength is
indicated by the number of bars displayed on
the screen.
No service: The phone is not receiving a
system signal.
In use/A call is in progress.
* No icon indicates the phone is in standby
mode.
In "Vibrate Only" mode.
In "Normal Mode".
In "Silent Mode".
In "Loud" mode.
Displayed when Alarm / Morning Call is set.
Displayed when Headset is connected.
Indicates charged battery level. (Icon
shows fully charged)
Using the Battery and Charger
Installing and Removing the Battery
Charge the battery fully before the initial use of the phone.
The phone comes with a rechargeable battery. Keep the
battery charged while not in use in order to maximize talk
and standby time when using the phone.
G
To install, insert the battery into the opening on the back
of the phone, and insert the bottom of battery into
groove at the bottom of the handset. Gently press down
the cover until the latch snaps into place.
G
To remove, turn the power off. Push the back cover
down. Push the tab with one hand and lift the top of the
battery to separate.
groove
slot
Advertisement
Table of Contents
