Helpful Information
When the Remote Control Cannot be Used
Button
When the remote control cannot be used,
press this button will enable the air conditioner
to operate in Automatic Mode.
Remote Control Signal Receiving Sound ("Beep")
Switch Off the Signal Receiving Sound
Press and hold this button for more than 10 seconds.
Switch On the Signal Receiving Sound
Press and hold this button for more than 10 seconds.
When not using the appliance for an extended period of time
When not using the air conditioner for an extended period of time
If it is not disconnected from the power supply, approximately 2.5 W of electricity will be consumed even though the
air conditioner has been turned off by using the remote control.
Thunder and Lightning
This air conditioner is equipped with a built in surge protective device.
However, in order to further protect your air conditioner from being
damaged by abnormally strong lightning activity, you may switch off
the main power supply and unplug from power socket.
9
Turn off
Press this button once again to turn
off the air conditionen.
(The operation lamp will go off.)
5 seconds
10 seconds
AUTO
TEST RUN
1 Beep
2 Beep
SOUND