Specifications - GHP Group TT15CPDG User's Manual And Operating Instructions

PROPANE TANK TOP CONSTRUCTION HEATERS
The heater is designed and approved for use as a construction heater under ANSI Z83.7b, CSA 2.14b.
it is hard to anticipate every use which may be made of this heater.
FIRE SAFETY AUTHORITY IF YOU HAVE QUESTIONS ABOUT APPLICATIONS.
Other standards govern the use of fuel gases and heat producing products in specific applications.
your local authority can advise you about these.
IMPORTANT: read ThiS uSer'S Manual CareFully and CoMpleTely BeFore Trying
To operaTe or ServiCe ThiS heaTer. iMproper uSe oF ThiS heaTer Can CauSe
SeriouS injury or deaTh FroM Fire, exploSion and CarBon Monoxide poiSoning.
This is a direct-fired tank top construction heater for either indoor construction or outdoor use. Its intended
use is primarily the temporary heating of buildings or structures under construction, alteration or repair. all the
products of combustion generated by the heater are forced through the heater and released into the area being
heated. This heater operates at approximately 98%+ combustion efficiency but still produces a small amount
of carbon monoxide. humans can tolerate small amounts of carbon monoxide for short periods. Carbon
monoxide can build up in a heated space and failure to provide adequate ventilation could result in poisoning
or death.
Model BTU OUTPUT (high)
TT15CL
TT15CDGP
TT15CPDG
TT30CL
TT30CDGP
TT30CPDG
PROPANE TANK TOP HEATER

SPECIFICATIONS

IGNITION
TYPE
15,000 Match
15,000 Match
15,000 Piezo
30,000 Match
30,000 Match
30,000 Piezo
CHECK WITH YOUR LOCAL
OPERATING
TIME (20 IB.
PRODUCT
CYLINDER)
28 Hrs. (high) 2.52 lbs / 1.14 kg
28 Hrs. (high) 2.52 lbs / 1.14 kg
28 Hrs. (high) 2.62 lbs / 1.19 kg
14 Hrs. (high) 5.19 lbs / 2.35 kg
14 Hrs. (high) 5.19 lbs / 2.35 kg
14 Hrs. (high) 5.39 lbs / 2.44 kg
3
WEIGHT
PACKAGED
3.37 lbs / 1.53 kg
3.37 lbs / 1.53 kg
3.48 lbs / 1.58 kg
6.58 lbs / 2.98 kg
6.58 lbs / 2.98 kg
6.78 lbs / 3.08 kg