Connecting With A Euro Scart Cable - LG 47LX9 Series Owner's Manual

CONNECTING WITH A EURO SCART CABLE

Connect the Euro scart socket of the external
1
equipment (DVD, VCR, etc.) to the AV1 Euro
scart socket on the TV.
Turn on the external equipment.
2
(Refer to the external equipment's manual for
operating instructions.)
Select AV1 input source using the INPUT but-
3
ton on the remote control.
Input
Scart
Video Audio
O O
AV1
Output Type
Current
input mode
Digital TV Digital TV
Analogue TV, AV Analogue TV
Component/RGB Analogue TV
HDMI
► TV Out : Outputs Analogue TV
or Digital TV signals.
NOTE
► Any Euro scart cable used must be signal shielded.
► When watching digital TV in 3D imaging mode, monitor out signals cannot be output through the SCART cable.
► If you set the 3D mode to On while a scheduled recording is performed on digital TV, monitor out signals cannot
be output through the SCART cable, and the recording cannot be performed.
Output
RGB Video, Audio
O
Analogue TV, Digital TV
USB IN
AV1
HDMI/DVI
AV1
IN3
(When DTV scheduled recording is in
(TV Out)
progress using recording equipment.)
HDMI IN
O
O
(The input mode is converted to DTV.)
X X
Except for 47/55LEX8 *
1
Only 47/55LEX8 *
ANTENNA/
CABLE IN
(RGB)
1
5