Table of Contents
Advertisement
The cutting line for the appliqué piece (APPLIQUE MATERIAL) will also be cut using the cutwork needles.
Cutwork mode OFF
"APPLIQUE MATERIAL", "APPLIQUE POSITION" and "APPLIQUE" are assigned to one needle bar number
and listed on the screen.
Depending on the thread color display setting, the display may appear as
MATERIAL),
Note
• Depending on the pattern, the cutting line may not be cut. In that case, the cutting line will be sewn.
• For details on patterns that cannot be used for cutwork, refer to "ERROR MESSAGES" on page 32.
(For use only with Embroidery Upgrade Kit I sold separately)
• When the pattern size is changed by using the stitch recalculator function, the cutting line will be sewn
instead of being cut.
(APPLIQUE POSITION) or
Cutwork mode ON
(APPLIQUE).
CUTWORK MODE
(APPLIQUE
9
Advertisement
Table of Contents
