Table of Contents
Advertisement
When the cutting line for a cutwork
pattern or appliqué piece exceeds the
embroidering area
Select a different pattern.
Use a larger embroidery frame to hoop the fabric
(when a larger frame is available for use).
Reposition the selected pattern.
Resize the selected pattern or decrease "Appliqué
Distance" and "Cutting Line Distance" so that the
cutting line fits within the embroidering area.
In order to import cutwork patterns, the machine
must be switched to Cutwork mode. If the
following error message appears, set the machine
to Cutwork mode. For details, refer to "Switching
to Cutwork Mode" on page 11.
ERROR MESSAGES
33
Advertisement
Table of Contents
