Problem Solving; Reading The Indicators - Epson EH-TW490 User Manual

Problem Solving

If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below.
See the following if the indicators do not show clearly what the problem might be.
"When the Indicators Provide No Help"
s

Reading the Indicators

The projector is provided with the following four indicators. The color and lit status of the indicators shows the status of the projector.
A
Power indicator
B
Status indicator
C
Lamp indicator
D
Temp indicator
Indicators
Power supply Status
Blue - Lit
Blue - Flashing Warm-up status
Blue - Lit
p.91
Indicates the projector's status.
Indicates the projector's status.
Indicates the projection lamp status.
Indicates the internal temperature status.
Status
Standby condition
Off
Network monitoring
status
Power is being supplied to the projector. When the [t] power button is pressed in this condition, projection
starts.
The projector is being monitored and controlled over a network (when Standby Mode is set to
Communication On). If the power cord is disconnected and connected in this status, the power indicator
flashes blue.
This is the status immediately after turning on the projector. Warm-up takes approximately 30 seconds after
the lamp turns on. In this status you cannot turn off the projector, even if you press the [t] power button.
Explanation
87